Quick and Easy Install Directions for Your APSkins Full AirPod Skins - Spanish
Choose Your Language
The contents you'll receive in your package:
- Two Complete Sets (2 Pairs) of APSkins AirPod Skins -
- Our Lifetime Guarantee Card
- One Prep Cleaning Pad
***AirPods NOT Included***
STEP 1: Clean both of your AirPods with the provided Prep Pad.
STEP 2: Carefully peel a skin from the backing sheet. Start at the top and gently work your way down. Note: There are two complete pairs of skins per sheet.
STEP 3: Align the "U" cutout with the oblong hole on the rear of the AirPod as per the photo below.
STEP 4: Gently lay the skin down- start at the "U" cutout and apply one flap- working slowly to prevent wrinkles. Make sure the cutout hole aligns with the sensor and the bottom part of the skin is even on the stalk.
Work slowly to get the best outcome. If you need to readjust, gently pull up the skin and get the alignment right prior to locking it into place by pressing hard. Repeat with the other flap.
STEP 5: Carefully wrap the bottom part of the skin around the stalk - first one side and then the other. If any wrinkles develop, gently lift a portion of the skin and tug it while laying it back down again. This will ensure a smooth, bubble-free wrap.
STEP 6: Firmly rub any dimples or bubbles with the glossy side of the backing paper the skin came on. Repeat Steps 1 through 6 with the remaining AirPod.
STEP 7: Congrats, you now have customized your AirPods!
Take your time and work slowly and carefully, and you will have perfectly applied AirPod skins!
If you need help:
Did you have an installation "oops"? Don't worry, that's why we ship 2 sets of skins with every order!
Still having problems? Email us at firstname.lastname@example.org and we will get you taken care of!